|
|
|
||||||||
Derby Race Tracks and
Judge
III
Indy Products Derby tracks are built for precision and durability. Constructed on a welded 2" by2" steel angle frame, the track surface is similar to a kitchen counter top. Each leg is fitted with a leveling screw so that each section can be fine tuned for optimum uniformity.
Several configurations are available and others can be built on special order.
- Center guided racetracks are available from 4 to 8 lanes.
- Edge guided tracks for FASCAR racers from 3 to 6 lanes.
- Most tracks contain 4 sections 8 ft. long. Need a longer or shorter track---- give us a call or send an E-mail.
- Guide strips are polyurethane varnished poplar.
- A flip up style starting gate is included with the basic track.
- Each leg contains a leveling screw
- Sections are joined at the ends through the frame for optimum in alignment.
- INDYTRACKS" and FASCAR
tracks can be build in custom sizes but the most popular sizes are
24" wide and consist of 4 sections of 8 feet long. This produces
a track that will fit into
most general purpose rooms with space at the stating and finish gates for
the "Drivers Judges etc." The Indytrack shown here is built to
run 6 lanes of Pinewood derby
style racer.
The finish line can be judged by "VOLUNTEERS" visually, or you can add "JUDGE III".
JUDGE III can be built for 2 to 8 lanes. With the optional TIMER function you will be able to measure elapsed times and order of finish. The gate shown here is attached to a "PC" plug in card and is supplied with software to operate the system. With the optional TIMER a cable and sensors for the starting gate is supplied.
